
Stormwater Pond Sediment Removal
Or call (843) 606-6711
Trusted by golf clubs, communities and property managers
Thornblade ClubBerkeley Hall ClubDaniel Island ClubBelfairMetairie Country ClubQueens Grant
What Is Stormwater Pond Sediment Removal?
Stormwater ponds are built to catch the sediment that runoff carries in from roads, roofs, lawns and construction. Over the years it fills the forebay and the main pool, the pond holds less water, and flooding and water quality problems follow. Sediment removal takes that material out and brings the pond back to the depth and capacity it was designed for.
Based in North Charleston, SC, we work across South Carolina, North Carolina, Georgia, Florida and Virginia. We remove sediment from stormwater ponds, forebays and other BMPs for HOAs, golf courses, property managers and municipalities.
Signs Your Pond Needs Sediment Removed
- The pond looks shallower than it used to, or plants are spreading out into the water. Clemson Extension notes that emergent vegetation grows in as sediment builds up.
- Sediment is piling up at inlet pipes or filling the forebay.
- Water backs up at inlets, or the pond floods in storms it used to handle.
- Water quality is getting worse.
- An inspection finds more sediment than the design allows.
How much is too much? When sediment has filled enough of the pond that it no longer holds the water it was built for. The state’s stormwater BMP handbook suggests clearing a wet pond’s forebay once about half of it has filled, and the main pool on a 5 to 10 year cycle once about a quarter of the permanent pool has filled. Clemson Extension uses the same 25 percent mark. Your approved plans or maintenance agreement may set a different schedule, and that one comes first.

How We Remove Sediment
Every pond is different, so the work follows what we find on site. A typical job runs like this:
- Free needs assessment call. We talk through what you are seeing, review your approved plans and maintenance agreement if you have them, and tell you what we need to scope the job.
- Measure before we dig. We recommend an inspection first, so the plan is based on how much sediment there is, where it sits and what is feeding it. It is your choice; if the scope is already clear, we can quote the removal directly.
- Remove what needs to come out. Depending on the site we use mechanical or hydraulic sediment removal and dewater the material where needed. Build up is often concentrated in the forebay or near inlets, and targeted removal there can delay a full dredge. When full dredging is the right answer, we say so.
- Haul and dispose of it properly. Stormwater sediment can carry pollutants from the drainage area, so testing and disposal requirements are confirmed before the work starts.
- Stabilize and deal with the source. We stabilize the areas the work disturbs and point out eroding banks, swales or inlets that keep sending sediment into the pond, so the problem does not come straight back.
- Document it. You get before and after documentation with photos and measurements for your records and your next inspection.
Sediment removal is often part of a wider plan. See our stormwater compliance, inspection and maintenance services and BMP inspections.
What Does Sediment Removal Cost?
We quote each pond after a free needs assessment call, because the price depends on the site. The main things that move it are:
- How much sediment has to come out, and whether it is in the forebay or the main pool
- Access for equipment to the water’s edge
- Whether water has to be pumped down and the sediment dewatered
- Testing, hauling distance and disposal
- Any permits or approvals the work needs
- Stabilizing the areas disturbed by the work
If a sediment depth survey is needed to size the job, it is quoted separately before any work, so you know what you are paying for.
Frequently Asked Questions
When does a stormwater pond need sediment removed?
When sediment has filled enough of the pond that it no longer holds the water it was built for. The state’s stormwater BMP handbook suggests clearing a wet pond’s forebay once about half of it has filled, and the main pool on a 5 to 10 year cycle once about a quarter of the permanent pool has filled. Clemson Extension uses the same 25 percent mark. Your approved plans or maintenance agreement may set a different schedule, and that one comes first.
Do I need an inspection before sediment removal?
We recommend one, because it shows how much sediment there is and what is causing it. It is not required: if the scope is clear, we can quote the removal directly.
Does the whole pond have to be dredged?
Not always. Build up is often concentrated in the forebay or near inlets, and removing it there, along with fixing what is feeding it, can delay a full dredge. In some ponds full dredging is the right answer, and we will tell you which applies.
Who pays for sediment removal in an HOA pond?
Usually the HOA, as the owner responsible for the pond under its maintenance agreement. The state’s maintenance agreement says that when the approved plans set a maintenance schedule, including sediment removal, it must be followed. Read who is responsible for an HOA’s stormwater pond in South Carolina.
Where We Work
Ecological Improvements is based in North Charleston, South Carolina. We remove sediment from stormwater ponds and BMPs across South Carolina, North Carolina, Georgia, Florida and Virginia. Call (843) 606-6711 or request a quote to book a free needs assessment call.
Find out how much sediment is in your pond
Every project starts with a free needs assessment call. We recommend an inspection before the work so you see the whole picture, and when the scope is clear we can send a quote first.

